Makita DHP481Z 18V Li-Ion LXT Brushless Combi Drill - Batteries and Charger Not Included

Product Information

Ribbed soft grip enables all finger tips to hold the handle securely against the strong rotational force of counter torque even in single handed operation Battery fuel gauge - The power remaining in the battery (not included) is indicated with the push of a button - 3 lights on : more than 50% of full battery capacity, 2 lights on : 20% to 50% of full battery capacity, 1 light on : less than 20% of full battery capacity The metal gearbox on this Makita brushless combi drill provides greater runtime and higher efficiency

is it a serious improvement over the 458 with it being brushless and the power output being bumped up from 88 to 115nm, or it's more or less the same stuff just a tiny bit better? what other differences , pros&cons there are? The Makita DHP486Z 18V LXT Brushless Hammer Driver Drill provides 130Nm of maximum fastening torque and no load speed of 2,100rpm combining rapid drilling speeds with high levels of torque. This model is based on the DHP481, but has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications. Not only has the performance on the DHP481 been increased but it is also considerably shorter. At 178mm in length this model is 27mm shorter than the DHP481. Making it the most compact drill in its class and extremely comfortable to use in all applications.

Cookie Notice

Specifications such as Impacts Per Minute and No-Load Speed remain equal to those of the DHP481, with a max of 31,500 ipm and a No Load max speed of 2,100 rpm. Some users don’t appreciate an RPM over 2,000, as when using larger drill bits, the drill struggles. With a max RPM of 2,100 on the highest setting, the option of a lower gear and thus a lower RPM of up to 550 rotations per minute is welcome. Users have regularly favoured higher RPMs over the years, possibly for no other reason than that they look good on paper! Another reason users will love this new model is that it’s approximately 14% smaller than the DHP481. Measuring just 178 x 81 x 248mm, it’s more likely to fit into compact spaces, thanks to the optimised gear assembly design. Impacts Per Minute and No-Load Speed Torque setting ring - wider torque range of 1-10Nm in clutch mode allows for versatile applications High performance: This 18v hammer drill has different diameters for different materials. Drilling diameter in steel: 13mm; drilling diameter in wood: 76mm; drilling diameter in masonry: 16mm. This combi drill performs brilliantly with a number of materials perfect for a multifaceted job. The LED light still remains in its original place – above the trigger, with twin LED’s as well as a handy after-glow function. The separate mode select collar has been eliminated to achieve a shorter length. While some people do prefer different mode select collars, the trend seems to be to remove this for the sake of a shorter drill.

Battery fuel gauge - 3 lights on = more than 50% battery capacity, 2 lights on = 20 to 50% capacity, 1 light on = less than 20% full battery capacity If you’re concerned about sound, this device produces 84 dB(A) at sound pressure level and 94 dB(A) at sound power level. The noise k factor is 3dB(A). All of which is a slight improvement versus its predecessor.Speed Mechanical Gearing – high speed mode produces 2,100rpm for rapid drilling speed while low speed produces high levels of torque to suit high load operation. Versatile function: The Makita cordless hammer drill has 3 combi drill modes: regular drill, hammer drill, drill driver mode for fastening and unfastening, plus 21 adjustable torque settings + drill. The drill also has forward and reverse rotation so that you can embed screws and remove them.