RONSEAL Ultimate Protection Decking Oil Natural Oak 5L

Product Information

Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. If any sanding works are carried out some fresh wood species must be weathered as directed above to improve absorbency once more. Sanding to finishing grades of no more than a P120 grit are recommended. Always wear a dust mask when sanding. For the following wood types, a weathering period is recommended. Depending on wood species, new or freshly sanded wood requires up to 12 weeks (approximate) exposure to the exterior elements before application. Balau: 12 weeks exposure. 006 Bangkirai is optically suitable and a very popular choice of colour tone.

The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. Many wood species contain water-soluble coloured extractives ( eg Larch ) which may leach out naturally when weathered. Weathered, bare wood surfaces can be refreshed with Osmo Wood Reviver Power-gel. Coverage 1 coat up to 8sqmetres/litre of smooth timber and up to 5sqmetresonrough sawn timber, 2 coats recommended. A range of interior and exterior wood oils suitable for any project and wood type. Includes traditional wood oils, Hardwax oils, wood oils with UV filters and more. Fatty Acid Cobalt Salt. Hydrocarbons, C10-C13, nalkanes, isoalkanes, cyclics, 2% aromatics. 1,2-Benzisothiazolone. reaction mass of: 5-chloro2-methyl-4-isothiazolin3-one [EC no. 247-500-7] and 2-methyl-2H-isothiazol3-one [EC no. 220-239-6] (3:1).If possible, and if the wood is absorbent please apply the first coat to all sides before installation. For the best protection, apply an exterior wood preservative to protect against mould, algae, dry rot, woodworm and wood related diseases

Storage & Home Clearance Furniture Clearance Garden & Outdoor Clearance Lighting Clearance Electrical Clearance Tools Clearance Paint & Decorating Clearance Flooring & Tiling Clearance Building & Hardware Clearance Bathrooms & Plumbing Clearance Kitchens Clearance After the weathering period, it is generally recommended to clean the surface from the extractive content. Osmo Wood Reviver Power-Gel can be used to refresh the colour of the wood. If necessary and before application, de-grease the dried surface with Osmo Brush Cleaner and Thinner (degreaser), always trial apply! Rosewood: 4-6 weeks exposure. However, Natural Oil Woodstain 727 Rosewood is optically suitable and requires a weathering period of approx. 12 weeks before use of Natural Oil Woodstain. Bangkirai: 12 weeks exposure. 006 Bangkirai is optically suitable and a very popular choice of colour tone. Coverage: 1 coat up to 8 sq metres/litre of smooth timber and up to 5 sq metres on rough sawn timber, 2 coats recommended.If it doesn't bead, you'll be ready to put on the oil. If it does then you'll have to clean it again until the water stops beading. Use stiff brush (Osmo Flat Brush) or a lint free cloth (e.g. for furniture) and apply thinly and evenly to the clean and dry wood surface along wood grain. We also deliver to the majority of non mainland UK locations including The scottish Highlands & islands, Isle of Man, Isle of Wight, Isles of Scilly and Northern Ireland. Please see full delivery terms for the extra charges associated with these locations By working with a variety of trusted Range Plus Partners, we’re able to offer our customers a wider selection of products. The final colour finish can vary considerably due to the age, type & condition of the timber being treated. We always recommend carrying out a test area first in an inconspicuous area to make sure you are happy with the final dried colour.