LIQUI MOLY PAG Air Conditioning Oil 46 | 250 ml | Compressor Oil | SKU: 4083

Product Information

It is also a suitable choice for systems with hermetic compressors, due to its ability to improve compressor motor performance.

Pag oil offers excellent compatibility with r134a refrigerant and provides good lubrication properties. On the other hand, poe oil has higher moisture tolerance and better compatibility with r410a refrigerant. The choice depends on the specific requirements of your AC system. Can I Mix Pag And Poe Oil In My AC system? General Motors recommends GM lubricants only (PAG-PSD1 #19260643 for 2013/14 Cadillac XTS, and PAG-ND12 #19299051 for 2013 Cadillac ATS) with R1234yf A/C systems. Universal compressor oils should NOT be used in R-1234yf applications. Advances in equipment technology have resulted in more demanding lubricant conditions and requirements, many beyond the capabilities of mineral oil-based lubricants. Synthetic lubricants can meet these demands because they perform better than mineral oil-based lubricants in many or all the critical performance areas: reduced wear and friction, resistance to sludge formation, lower volatility, greater corrosion protection, and improved thermal and oxidative stability. When you are replacing a compressor, it is important to add the right amount of Pag oil. If you do not add enough, the new compressor may not work properly. If you add too much, it can cause damage to the compressor and other parts of the system. So you need to know how much PAG oil to add when replacing the compressor in this article, you will get it Also read Can I use 10w30 oil in my air compressorWhen performing a compressor oil balance, it’s important to always follow the instructions provided with the compressor or in the vehicle service manual, to know how much oil to add prior to installation. Most times this will involve draining and They burn off cleanly, leaving no residue, and have been used as a carrier oil for solid lubricants for high-temperature chain lubrication. Some versions are food grade and biodegradable. They are used as compressor oils in rotary screw and reciprocating units, worm gear oils, fire-resistant lubricants, metal-working fluids and as brake fluids. PAO fluids are classified as a Group IV base oil and are made by a two-step reaction process using linear alpha-olefins like 1-decene. The first step is the synthesis of oligomers (polymers with few repeating monomer units) from the linear alpha-olefin. The second step is the hydrogenation of the remaining double bonds (unsaturation) in the oligomer and subsequent distillation to separate the unreacted monomer and light-viscosity grade PAO. R134a has a high GWP (global warming potential) of 1430. With the current EC Directive 2006/40/EC it was decided to only use refrigerants with a GWP of less than 150 in the future.

PAG oils are also valued for their low volatility in high-temperature applications, and for resistance to formation of residue and deposits. Their biodegradability makes them ideal for environmentally sensitive applications. Do not expose any components of the air-conditioning system to heat. After paintwork, do not heat vehicles above 75°C (drying furnace). If this cannot be avoided, drain the air-conditioning system beforehand. Mineral refrigerant oil, also known as Alkyl Benzene Oil, was the default option up until HFC refrigerants became common place. Today it is still used in older R-12 refrigerant systems. And because it does not absorb moisture, it is also used to lubricate

The Development of Polyalkylene Glycol

High viscosity index: Pag oil has a high viscosity index, which means it retains its viscosity over a wide range of temperatures. This makes it suitable for both low and high-temperature applications. The two largest U.S. air compressor OEMs have used PAG lubricants as the standard factory fill in rotary screw air compressors for almost 20 years. More recently, a third compressor OEM has begun to offer PAG oil as an optional fluid.