Kestrel 2000 Wind Meter

Product Information

Convenient and reliable, the Kestrel 1000 is the perfect tool for model plane pilots, kite boarders, and other outdoor enthusiasts who rely on accurate wind speed information. The Kestrel 1000 is the most common handheld wind instrument for a DZSO (Drop Zone Safety Officer). A hard slide-on protective case, lanyard, and lithium battery are included. User Replaceable Impeller Hermetically sealed, precision thermistor mounted externally and thermally isolated (US Patent 5,939,645) for rapid response. Airflow of 2.2 mph|1 m/s or greater provides fastest response and reduction of insolation effect. Calibration drift negligible. Thermistor may also be used to measure temperature of water or snow by submerging thermistor portion into material -- remove impeller prior to taking submerged measurements and ensure humidity sensor membrane is free of liquid water prior to taking humidity-based measurements after submersion. Thanks to the patented external temperature sensor and waterproof construction, the Kestrel 2000 weather meter can take accurate water and snow temperature readings, and since it is isolated from the case, you can be sure that the temperature reading is accurate and not influenced by your hand warming the unit.

Vane – Vane anemometers work by measuring the force exerted on a small piece of metal as it is blown around in the wind. They are cheap, but not accurate because wind speeds vary at different heights above ground level and vane anemometers only read speed at one height (typically about three meters). One more thing to consider is that they are very fragile. As for size, you’ll want to find something that isn’t too bulky or heavy in your hands. This is especially important if you’ll be using it frequently and for long periods of time. Usually, the smaller and lighter models are the more portable ones. Rig tension/Head Stay Sag- Rig Tension and Headstay sag can be the number one cause of speed and height issues. If you are sailing in light air conditions and the rig is too tight you will not generate enough headstay sag making the jib too flat and less powerful. On the other side, if you are sailing in over powered conditions and the rig is not tight enough, the headstay will have too much sag making the jib too deep pulling the bow down when the main is eased. This causes leeward helm and more heel angle. Really focus on the leeward shroud tension and the amount the headstay is moving. In light air you want a loose rig and more sag in the headstay, in heavier air you want a tighter rig and no movement in the headstay. Adjust this according to the wind conditions. Hot-wire – Hot-wire anemometers are the most common type. They work by heating a wire and measuring the change in temperature of the air as it flows past the wire. Hot-wire anemometers are very accurate, but they can be affected by the temperature of the air. In addition, they are fragile and can be easily damaged. climate research – scientists use anemometers to measure wind speed in different types of weather conditions;

No matter which type of anemometer you choose, make sure to calibrate it before use. This ensures that the readings are accurate and consistent. How to Choose the Best Handheld Anemometer Handheld wind speed weather station meters and handheld weather stations measure the velocity, force, or speed of wind. Different handheld wind meters use different methods to calculate the measured values. In all conditions the crew weight placement in the boat is very critical. You have the ability to move fore and aft in the boat as well as side to side. The goal is to sail the boat as balanced as possible while sailing as powered up as possible. Being aggressive with crew weight means paying attention to heel angle at them same time as sail trim. If you can hike harder and minimize the amount the sails are eased to keep the boat flat that means you will sail faster. Compasses are pretty good at covering north to south, but not always east to west. Anemometers aren’t confused by magnetic fields, which means you can rely on their measurements to analyze pressure and forecast how the weather will change. We also look at several different anemometers that are resistant to interference. Anemometers can be stand-alone devices, or built into weather stations. Although both are considered accurate, the accuracy of the anemometer is dependent on how you use it.

With the ability to measure wind speed, temperature, humidity, altitude, barometric pressure and more, you can trust the 3500NV portable weather station to provide accurate information. The Kestrel 2000 wind meter can easily be switched between mph, km/h, ft/min, m/s, knots and Beaufort Scale. Convenient and reliable, the Kestrel 2000 is the perfect tool for kite surfers, sailors and other outdoor enthusiasts. It is also ideal for farming & agriculture. Kestrel 2000 Anemometer and Temperature Meter Key Features Be aggressive with pumping the sheet. As the pressure builds in the sail from a puff, pump into the pressure build and then ease again aggressively to a 4”curl. This will promote planning and or surfing. Convenient and reliable, the Kestrel 2000 is the perfect tool for kite surfers, sailorsPay attention to the top batten position. If the sail is too open (twisted) pull vang on to get the top batten 90 degrees to the wind direction. Digital anemometers usually have a small wind vane and sensor that is plugged into your smartphone or laptop. These are very accurate and can measure wind speeds as low as 0.01 mph. However, these devices can be quite expensive, especially if you need to buy the corresponding app or software.

The Kestrel 3500 NV portable weather stations are top-of-the-line, 4-in-1 instruments that provide you with accurate, reliable data for a wide range of weather-related tasks. They measure and display current atmospheric conditions as well as the trend arrow, making it easy to monitor pressure, temperature, humidity changes, and time. These portable weather stations also calculate altitude from internal software and display trends in barometric pressure over time. Again, procedures may vary depending on the model, but most anemometers can be held in one hand and rotated so that the wind vane points into the wind. The reading is then taken from the display screen. What type of anemometer is the most accurate? These are just some examples. There are many more reasons to use anemometers! Benefits of Handheld Anemometers During gybes, leave the pole alone and focus on keeping the spinnaker full through the gybe. Once the boom comes over, hand off the sheets to the skipper and switch the pole. Air, water or snow temperature. Hermetically-sealed, precision thermistor mounted externally and thermally isolated (US Patent 5,939,645) for rapid response. Airflow of 2.2 mph | 1 m/s or greater provides fastest response and reduction of insulation effect. Calibration drift negligible.The main sail trim gives the boat the ability to sail high, pointing. The main can also generate too much helm. Being aggressive with main sail trim is critical to the boats balance and performance.Set the sail up for the average wind speed- Through rig tune and sail depth, set your main sail up for the average wind speed so you can focus on using the main sheet to adjust the boats balance. In Scotland, the Scottish Raptor Monitoring Scheme is working to enhance coverage and is aiming to produce local study area trends for this species ( Challis et al. 2018). The Kestrel 3500NV portable weather station with Altitude and Barometric Pressure combines a full color display with the power of a complete weather lab in a single instrument. This portable weather meter offers a very bright display for easy viewing, is compatible with Kestrel's optional weather sensor kits, and includes alkaline batteries.