When the paint is bubbling off the surface, test a small area with a wide (3″) putty knife. If the paint peels off down to the fiberglass, it’s ready. If not, wait a few more minutes (but not so long that the mess becomes dry). Use the scraper to also scrape the boat propeller: Use the hull scraper and also scrape the boat propeller and propeller shafts to remove any heavy dirt around the propeller area of the boat For most boat owners, this is an optional step to clean the hull that will not be needed if the above steps are followed. It is important that the fairing compound not be harder than the surrounding surface, or it will be almost impossible to smooth without creating hollows. For this reason, super hard epoxy compounds designed for mending broken metal are not recommended for fairing. An epoxy and microballoon mixture just dense enough to hang on a vertical surface without sagging off is ideal. Thoroughly pressure-wash your boat on a regular basis to remove salt debris or other sorts of marine growth and filth that could accumulate. Use cleaning agents that are especially formulated to shield your vessel’s finish.

C-Pole Brush: The 10ft+ aluminum C-pole is shaped like the letter C and it can reach up to 10ft+ underwater and clean the boat bottom with its attached scrub Get diving/snorkeling gear: Get diving gear/snorkeling gear like goggles, a breathing tube/tank and a swimsuit/diving suit. This will enable you to breathe as you clean the hull underwater Although prevention of fouling can be aided by the use of antifouling products such as ultrasonic antifouling or anti fouling paint, some build up will occur regardless. This may be less with boats that use ablative paint (also known as soft antifouling paint) as biofouling control as this sheds the top layer of paint into the water, along with any fouling that is attached. But over time, it will still have a build up of dirt and marine fouling that will need to be managed to maintain your boat’s performance. There are many reasons to choose a glass bottom boat excursion, especially if you are travelling with family and have children of different ages – the main reason is because it will please them all! You will give them (and yourself) a unique experience on a boat ride quite different from the traditional ones, and offer an unusual and exciting perspective of the aquatic environment. Wear protective clothing when using paint remover. Old long sleeve shirts, old pants, and old shoes are called for, as are rubber gloves. Protective glasses are also a good idea.

Now, you’re probably thinking, aren’t ablative paints supposed to be washed off along with the gunk after every season? Well, what’s good about this boat bottom paint is that it kind of gives you the option to decide. There’s no better way to describe it than just being what a hard ablative paint is all about. Getting the old bottom paint off is one of the least plea­sant tasks associated with boating. Most bottom paints sand poorly. Using a heat gun puts a lot of unpleasant and toxic vapors in the air. Drill-attached mechanical paint removing tools we have used are hopelessly slow. It cleans the hull in an eco-friendly way that protects the environment with no toxic chemicals and 100% recyclable materials The disadvantages of cleaning the hull using a boat scraper are it means you have to get into the water to clean the hull which doesn't suit some boat owners and it can damage the hull material/hull paint if used aggressively or forcefully

That leaves chemical paint removers, and chemical paint removers are messy, expensive, and no fun at all. Generally, however, they are the best solution.

In general, this bottom paint product comes with a nice tidy white color that goes on easily and smoothly just like how house paint does. In the same way, it is capable of storing quite well and is known to work well for steel, wooden and fiberglass vessels. As compared to other similar options found in the market at present, this has the power to stay on permanently and can be left out of the water without the need to worry about serious damage. This is also reliable in terms of defying various marine fouling organisms such as algae, barnacles and slime. But, you need to set ample time for it to dry and be sure to follow the manufacturer’s instructions when applying it to ensure excellent final outcome. 7. Interlux Micron Extra Antifouling Paint For most recreational boats, cleaning the boat hull in the water with cleaning pads takes approximately 45 minutes to complete. 4. Use A Motorized Underwater Rotary Brush System To Remove The Deepest Dirt From The Boat Hull Overall, it’s a solid multi-purpose and multi season paint that you can apply on just about anything made of metal, as you know, it will be a rust or corrosion problem over time. I especially like that the brand has plenty of color options to choose from, so if you happen to be digging aquamarine over cruiser blue, then you just grab a can and start painting! The finish looks good as new every time. It’s not just a question of moving from dirty to clean water, but any dramatic change in the water environment will challenge the growth that’s built up. Hull cleaning: Scrub or scrape?