Joined in 2023 
82 
63 About this deal
In testing, the robot connected to its companion app on the first try. Once you pair the robot, the app walks you through some of its features and prompts you to install firmware updates. We measured the following values during test runs in our flat (approx. 40 m² cleaning area | 80 m² living area): The bottom of the robot includes a main brush roll in the middle, two side brushes to sweep dust from corners, two mounting slots for the mopping pads, six anti-drop sensors, and one carpet-detection sensor. The anti-drop sensors prevent it from falling down the stairs. The carpet detection sensors allow the robot to automatically increases suction power when it detects carpet, and, to avoid carpet when mopping. Cleaning customization options in the Ecovacs Home app (unknown) We have tested the noise emission in various settings and tested the noise emission when the dust container is emptied into the base station. We measured the robot as follows: Once the pairing process is complete, the app prompts you to name your robot (I went with Deebot X1 Omni), select a time zone and language, and install firmware updates. From there, you can tap the Return to Charge button in the app to instruct the robot to navigate to its base. Yiko supports a wide range of voice commands (unknown)
You know the drill from regular mopping: the more pressure applied to the mop, the better the result.To wake up the voice assistant, just say, "OK Yiko," and wait for it to reply, "I'm here." Yiko supports a wide range of voice commands, including "start cleaning," "make a new map," "mop the kitchen," and, "go mop the floor around the living room sofa." You can even say "come clean here" if you're in the same room as the robot, and it navigates to your position. Similarly, when you tell it, "don't vacuum here," the vacuum moves to a different spot. Yiko is enabled by default; to disable it, just navigate to More Settings in the Ecovacs app, select Yiko Voice Assistant, and toggle it off. The app also supports and suggests routines that let you apply frequently used cleaning settings with a single tap. It suggested an After Meals routine, for instance, that sends the robot right to the kitchen and dining room to vacuum and mop. Furthermore, you can also see wave-like design elements around the laser tower. These probably represent the pulsating mopping plate (sonic mopping). Based on internal testing carried out by the manufacturer. The term relates to the integrated mop module being able to be driven to produce high-speed reciprocating vibration of up to 3000 times/min, i.e. up to a frequency of 50Hz which is within a “sonic” range (20 to 20,000Hz). The mop is reusable. You should wash it in the washing machine at 40 degrees after each mopping trip.
When the robot vacuum finished cleaning the second floor, it’ll return to where you dropped it off and wait for you to carry it down. On the other hand, larger areas can be mopped in one go (without having to fill the water tank by hand halfway through...). Mop floors and vacuum carpets in one clean with the auto-lifting VibraRise mop. The mop lifts* automatically when a carpet is detected to prevent dragging a dirty mop across clean floors.
The handling and the build quality of the individual compartments are also very well done. Everything works smoothly and easily. Arrow key control: steer the robot to the desired location in the home with your own hands ⬆️ ⬇️ ⬅️ ➡️ With the help of the emptying station, the small mobile dust container is always emptied automatically. Between the X1 Omni's water tanks is a narrow accessory storage box that houses two extra washable mopping pads and a cleaning brush. The Omni Station doesn't offer storage space for the mopping pad plates, but I wish it did. At first we thought that the manufacturer had made a mistake here. But with a little thought we realised: the colour of the power cable was chosen deliberately because it will hardly be visible on white walls.
Great Deal 
New Comment