APC UPS Network Management Card 2 - AP9630 - Compatible with SmartSlot enabled UPSs

Product Information

Note : SUVT model UPSs with v7.X.X firmware should use NMC2 to take advantage of all UPS firmware enhancements. Access to the same tabs and menus as a Device User above, but without the capability to change configurations, control devices, delete data, or use file transfer options. Links to configuration options are visible but disabled. (The event and data logs display no button for this user to clear the log).

Type at least one letter of a command and press the T AB key to scroll through a list of valid commands that match the text you typed in the command line.Find the firmware file. This one is “Network Management Card v6.5.0 Firmware for Symmetra 3-Phase with AP9630/AP9631/AP9635” Example: To configure the TCP/IP port to communicate using 100 Mbps with half-duplex communication (communication in only one direction at a time), type:

To access the command line interface, you can use either a local, serial connection, or a remote connection (Telnet or SSH) with a computer on the same network as the Network Management Card (NMC). The AP9631 Network Management Card includes all AP9630 Network Management Card features and the following:These commands are only available on the MGE Galaxy 300 and MGE Galaxy 7000 UPS. Some options may only be available based on the individual UPS model.

Press the U P arrow key to view the command that was entered most recently in the session. Use the U P and D OWN arrow keys to scroll through a list of up to ten previous commands. below are Web-based, IPv6 Ready products that manage supported devices using multiple open standards such as:At the command line interface, use commands to configure the NMC. To use a command, type the command and press E NTER. Commands and arguments are valid in lowercase, uppercase, or mixed case. Options are case-sensitive. You can access the command line interface through Telnet or SSH. Telnet is enabled by default. Enabling SSH disables Telnet. On the APC SMX1500RM2U is a slot for a APC Network Management Card. After some research I learned it will take either the AP9630, AP9631, AP9640, and AP9641 all of which are hot swap-able. The difference between the AP9630/31 and AP9640/41 is the network speed of the card. The AP9630/31 are only 10/100 speeds, and the AP9640/41 are 10/100/1000 speeds. The AP9631 and AP9641 can hook up temp monitoring and it has some other ports. If you do not use a BOOTP or DHCP server, see the Network Management Card Installation Manual provided in In the user interface, recent events on the Home tab; the menus on the UPS tab; and the menus of the Logs tab including the event and data logs, accessible under the Events and Data headings. (The event and data logs display no button for this user to clear the log).