FIRSTINFO 4.9 Feet (59 inches) Long Automotive Brake Fluid Bleeder Bleeding Hose

Product Information

That volume of fluid never changes unless (obviously) more fluid was added at some point previously, when the pistons were in the "out" position. A definite must if you intend on running Maguras, No more bath bleeding for me, It's just a plain nuisance. Once the pistons are flush in the caliper, suck the remaining old fluid out, clean the bottom of the reservoir with a fresh paper towel, then refill and reinstall cover. The clear tubing does go opaque when exposed to brake fluid for a long time, which you can prolong by rinsing it and drying when done. I use translucent silicone tubing, we use it in pubs over here in the UK for the lines to the beer taps.

It’s flexible, doesn’t retain its shape if wound up, it’s flexible enough to press onto a bleeder easily, overall awesome to work with. Fabriqué en caoutchouc flexible résistant au liquide de frein, ce produit a été introduit comme adaptateur de purge de remplacement pour la gamme Laser de bouteilles de purge et de purgeurs à vide. BTW - be prepared to struggle to get the front calipers bled properly - air gets trapped inside and it can be frustrating to get it all out if it's your first time doing it.Your credit rating may be affected which will make it more difficult or more expensive for you to obtain credit in the future. My understanding is that the 2015x DCT is an ABS model so I selected XD (Auto G/box/ABS) which should cover the 12-17 model years. If service, performance and value are your motivation then Competition Supplies are your best choice. First time bleeding brakes and read about putting a hose over the nipple into a soda can as the one man method.

I put it down to the nature of the little plastic check valve - it's spring-loaded (and really cheap). The hose is very "stretchy" - it has to be pushed onto the front bleeders carefully because they are bigger in diameter, but it seals well and works great. If you are doing a one man bleed-down for the first time, this may sound superfluous, bit make sure you keep the end of the tube in the soda can submerged in brale fluid or you'll just end up sucking air into the system. You might as well suck most of it out anyway at the start of the fluid change and start the bleed process with as much fresh fluid as possible. The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance and in a very simple way.

Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. You should be able to change your brake pads without doing anything to the brake fluid first, even removing the reservoir caps.

Slow communications to to rectify the problem but a suitable agreement was achieved after several days. I have a fair amount of it now, so I don't worry if it will harden, because it's easy to just replace it. I used it once to bleed my front and rear brakes, and when I was done, rinsed all the bleed kit parts with water and dish soap.

Come join the discussion about bike parts, components, deals, performance, modifications, classifieds, trails, troubleshooting, maintenance, and more! Save time removing air from brake system by doing allthe wheels at the same time; also eliminates the need foran assistant.