Came 2 x 5 litre tubs and cream was in plastic sealed bag within tub which meant no danger spillage and also ease to use thereafter. If I use Climashield cream on this surface will it adhere to the deteriated silicone area and would it still appear clear when dried. Many homes and commercial properties in the UK are built using single-skin walls, making them unsuitable for cavity wall insulation.

Had to seal a (very) porous garage wall from the elements and decided on ClimaShield as one of the walls I don't have external access to and as far as I could tell this could be applied to the inside wall. As we had some really good weather towards the end of March and temperatures were above 10c, I repointed my dpc and treated brickwork after it had dried thoroughly. After a few days it has almost become invisible and subsequent rain can be seen running off the wall.If you’ve previously had issues with damp cavity wall insulation, I recommend repairing the wall so there are no gaps, cracks or missing mortar. This is in contrast to many standard brick sealer and stone sealer products which coat the masonry with a thin film. Due to its novel formulation and deep penetration, Stormdry is resistant to UV light and other forms of degradation, resulting in a life expectancy of 20 – 30 years.

Heat transmission from an internal room is not going to be any greater due to evaporation from the outer surface of a wall.

I found applying the cream with a roller too cumbersome but this is probably down to the type of brickwork. Climashield Masonry Protection Cream is a VOC free, water based, protective treatment brick waterproofer, specially formulated to create strong waterproofing properties on brickwork, masonry and render. Dirty surfaces should be cleaned before the application of Stormdry Masonry Protection Cream to the recommendations given in BS8221-1:2000, “Code of practice for cleaning and surface repair of buildings.