EverBuild 406 Stabilising Solution 5 Litre

£4.995
FREE Shipping

EverBuild 406 Stabilising Solution 5 Litre

EverBuild 406 Stabilising Solution 5 Litre

RRP: £9.99
Price: £4.995
£4.995 FREE Shipping

In stock

We accept the following payment methods

Description

Normally, masonry walls can be primed with a thinned solution of water-based masonry paint. But, sometimes, the surface can be loose and/or powdery and this can cause problems. You may find that this process removes a lot of the loose particles on the surface, presenting you with a solid surface which can easily be primed with a thineed solution of masonry paint. I am about to re-paint some stonework outside my house. It has previously been painted, but in areas it is a little flaky and kind of like white dust build up, think it’s salt or something like that.

Scrape off as much as you can and let it dry-out naturally, which could take a long time, before attempting to redecorate. Would you ever used a watered down first coat on areas of render that are dry and chalky so have been treated with stabilising solution? Furthermore, the stabilising solution and PVA will both act to keep any moisture within the concrete, hence why you experiencing problems. The moisture will force its way out eventually.

When you have removed as much loose material as possible, treat the worst affected areas with a stabilising solution which will bind any reaming loose martial, presenting you with a solid surface on which to paint. Only do this on the very worst affected areas though. In such cases, I always recommend that the wall is left exposed to weather for at least 12 months prior to painting. For larger areas of filler I roughly smoothed over, then again used the paintbrush to texture and blend in the filler. Just scraping over with a knife will leave a smooth area which will show through the paint Tools and equipment should be cleaned with warm soap and water immediately after use. Pump sprayers especially should be thoroughly flushed through with warm soapy water and then flushed with clean water until free of all residues. DO NOT allow to dry before cleaning.

Stabilises and hardens “friable” masonry or masonry surfaces which may have “gone soft” due to extreme weathering. Dry and chalky areas can sometimes be primed with a watered down coat. But if the area has already been treated with a stabilising solution I would paint over this with unthinned masonry paint. Below is a sample of questions received on the subject of stabilising primers… White dust on stonework? You should then be able to paint the wall as normal with 2 regular coats of masonry paint but keep an eye out for any signs of bubbling in the weeks after. This would indicate a high density of moisture content that is trying to force its way out. Allows painting of new render finishes and re-pointing repairs without alkaline contamination of the paint, which would otherwise delay painting by up to 2 months.I plan to use Macpherson powerkote, hopefully three coats to give it a strong finish. Do you think the powerkote will be suitable to use? Eventually I repainted with a water based masonry paint. Every year since then the paint has bubbled and I have had to scrape and repaint. Just bear in mind that the stabilising solution will impair the breathability of the finishing coats so only apply to areas where it’s really necessary. Kingfisher “Weatherflex Stabilising Solution” is a solvent-free, fine particle, pure acrylic ester copolymer primer, sealer and stabiliser for masonry. If this be the case then scrape off any loos paint, allow to dry out over a period of a few weeks and paint again. You may well find this is an ongoing process or it may be isolated to one or two problem areas.

Would you recommend the use of sandtex stabilising solution as a primer to prevent the paint failure?? An algebraic Riccati equation is a type of nonlinear equation that arises in the context of infinite-horizon optimal control problems in continuous time or discrete time.

Materials and Methods

Regular masonry paint is formulated to allow small levels of moisture to escape through evaporation. It’s important, therefore, to avoid the use of sealers or primers unless absolutely necessary.



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop